Skip to main content

Shop by room · Richmond, BC

Floor tile in Richmond

Running one tile through the main floor is the cheapest way to make a modest home feel generous. It's also where a quantity mistake stings most, because a second dye lot shows up as a line across the room you'll notice from the doorway for years.

Polished grey marble floor tile meeting wood-look plank flooring in a finished home near Richmond, BC

Four decisions worth getting right

Buy the entire floor in one lot

No exceptions on this one. Measure, add the overage, buy the lot in one go. Coming back for three more boxes two months later nearly always gives you a shade difference, and you'll spot it from the doorway for as long as you live there.

The substrate decides the result

Tile can't follow a wavy subfloor, and the bigger the format the less it forgives. Budget for levelling compound. On a wood subfloor, ask about deflection before you commit to large format, because movement cracks grout first and tile second.

Wood-look without the moisture problem

Plank porcelain gets you the warmth of wood in an entry, bathroom or basement where real wood would be a mistake. Go for longer planks with more face variations. That's what keeps the pattern from repeating obviously once a whole room is down.

Underfloor heating changes the build-up

Radiant heat makes the whole floor assembly taller and changes what the tile has to cope with. Decide early: it affects the adhesive, the uncoupling membrane, and the height of every threshold in the house.

How much floor tile do you need?

Add every surface you're tiling. We'll put the trade-standard overage on for cuts and breakage, then round up to whole boxes.

Floor in herringbone, walls straight? They waste at different rates, so run those as two separate sums.

Add your measurements and the numbers appear here.

These are starting figures, not a quote. Large format and awkward rooms waste more; mosaic on sheets wastes less. Buy the whole job in one go so every box comes from the same production run.

Floor tile questions

How much floor tile should I order?

Measure the area, then add ten percent for a straight layout, fifteen for diagonal, twenty for herringbone or a floor with lots of cuts. Our tile calculator does the maths and rounds up to whole boxes. Then buy the lot in one go.

Can I tile over an existing floor?

Sometimes. It depends entirely on what's under there and how sound it is. The usual constraint isn't the tiling, it's height at doorways and under appliances. Bring photos and measurements and we'll tell you straight whether it's worth it.

Is wood-look tile convincing?

Modern plank porcelain is genuinely good, especially in longer formats with lots of face variations. It won't fool anyone who crouches down for a close look, but across a room it reads as wood, and it handles water, dogs and a Lower Mainland winter in a way wood doesn't.

Not finding the answer? Call (778) 889-2189 or read the full FAQ.

Planning floor tile?

Tell us about the job and we'll come back inside one business day with materials, quantities and pricing. No charge, and no one will chase you afterwards.

  • A reply from a person, not a form letter
  • Quantities worked out properly, overage included
  • We'll say so when the cheaper tile is the better call
What are you tiling?

Call Directions Get a quote