Skip to main content

Buying guide · 4 min read

Porcelain vs ceramic: which should you buy?

Porcelain is denser and tougher. That doesn't automatically make it the right buy, and on a dry wall it's often money better spent elsewhere.

Written by the team at AMG Tile & Stone, Richmond BC. Last updated .

The actual difference

Both are fired clay. Porcelain uses a finer, denser body fired hotter and for longer, which is why it drinks less water and chips less easily. The industry line is 0.5% of its weight in water or less. Ceramic takes on more.

That one property drives everything else. Low absorption is what makes porcelain safe in a shower, tough enough to survive a freeze-thaw winter outdoors, and hard enough for a hallway taking wet boots all January.

Where porcelain is worth it

Floors, especially an entry or a kitchen. Shower floors and anywhere else that stays wet. Anything outdoors on this coast, where freeze-thaw will finish off a tile that holds water. Commercial spaces where the traffic never lets up.

Through-body porcelain is worth another step up on a floor you plan to abuse. The colour runs the whole thickness, so a chip looks like the tile instead of a white scar.

Where ceramic is the smarter buy

A dry backsplash. A powder room wall. Anywhere above the splash line that'll never see standing water and never get walked on.

Ceramic is lighter, which matters on a wall, and easier to cut, which can take real money off the labour on a fiddly install. It also tends to come in the handmade-look glazes people want behind a kitchen range, where the slight irregularity is the whole point.

Paying the porcelain premium for a backsplash is a common and avoidable waste. We'll say so at the counter.

What the labels won't tell you

Rectified isn't a synonym for porcelain. It just means the tile was cut square after firing so it can go down with a very tight joint. Rectified ceramic exists, and so does non-rectified porcelain. If you want a near-seamless large-format wall, rectified is the word to look for.

PEI describes surface wear, not strength or water absorption. A high-PEI glazed ceramic can be perfectly good on a residential floor. Treat it as one input, not a verdict.

The short version

Wet, walked on, or outdoors? Porcelain. A dry wall you're only going to look at? Ceramic is fine, and often better value. If you're not sure, bring the dimensions and tell us what actually happens in that room. We'll give you a straight answer rather than talking you into the denser product.

Easier to settle in person

Send us the room and we'll come back inside one business day with materials, quantities and pricing. Or come by 3751 Jacombs Rd #115 and we'll work through it with you at the counter.

Get a quote Visit the showroom

Still have a question?

Tell us about the job and we'll come back inside one business day with materials, quantities and pricing. No charge, and no one will chase you afterwards.

  • A reply from a person, not a form letter
  • Quantities worked out properly, overage included
  • We'll say so when the cheaper tile is the better call
What are you tiling?

Call Directions Get a quote