Skip to main content

Shop by room · Richmond, BC

Bathroom tile in Richmond

Bathrooms are the hardest room to undo and the easiest to get wrong. The floor has to be safe when it's wet, the walls have to survive ten years of steam, and somehow the whole thing needs to look bigger than it is. Four decisions do most of the work.

White marble-look porcelain tile around a finished bathtub and shower in Richmond, BC

Four decisions worth getting right

Slip rating on the floor, not the walls

A polished tile that looks sharp on the wall is a hazard on a wet floor. Ask us for the slip rating and keep polished finishes above the splash line. On a shower floor, go smaller: more grout lines is more for your feet to grip.

Large format makes a small room bigger

Everyone's instinct in a tight ensuite is to go small. Try the opposite. Fewer grout lines means fewer places for the eye to stop, so the surface reads as one piece. Carry the same tile up the walls and the room quietly stops advertising how small it is.

Decide the niche before the waterproofing goes in

A niche gets framed and waterproofed before any tile goes up, so size and height need settling while the walls are still open. One sheet of mosaic usually covers it, and it's the detail guests end up commenting on.

Grout colour is half the finish

Match the grout and the wall becomes one surface. Contrast it and every tile turns into a shape. Both are fine; picking by accident isn't. Settle it in daylight with the real samples, because the same tile genuinely looks like two different products.

How much bathroom tile do you need?

Add every surface you're tiling. We'll put the trade-standard overage on for cuts and breakage, then round up to whole boxes.

Floor in herringbone, walls straight? They waste at different rates, so run those as two separate sums.

Add your measurements and the numbers appear here.

These are starting figures, not a quote. Large format and awkward rooms waste more; mosaic on sheets wastes less. Buy the whole job in one go so every box comes from the same production run.

Bathroom tile questions

What tile is best for a small bathroom?

Large-format porcelain, carried up the walls as well as across the floor. Fewer grout lines means fewer interruptions, and the room reads bigger for it. Keep a matte or textured finish on the floor for grip and save the polished tile for the walls.

Can I use the same tile on the bathroom floor and walls?

Usually, as long as the floor version has a decent slip rating. Plenty of ranges do the same look as a polished wall tile and a textured floor tile. One material throughout is the easiest way to make a small bathroom feel considered rather than cramped.

Do I need to seal bathroom tile?

Porcelain and glazed ceramic, no. Natural stone, yes, at install and every year or two after. Cement grout is worth sealing in a shower whatever the tile is on. Epoxy grout sidesteps the question completely, though it's a harder install.

Not finding the answer? Call (778) 889-2189 or read the full FAQ.

Planning bathroom tile?

Tell us about the job and we'll come back inside one business day with materials, quantities and pricing. No charge, and no one will chase you afterwards.

  • A reply from a person, not a form letter
  • Quantities worked out properly, overage included
  • We'll say so when the cheaper tile is the better call
What are you tiling?

Call Directions Get a quote